USIMF Prowler 4×4 STL 3D Print Files

(2 customer reviews)

£20.00 £15.00 Price ex. VAT: £12.50

USIMF Prowler 4×4 STL 3D Print Files



USIMF Prowler 4×4 STL 3D Print Files



Concept & Original Design by Stephane Chasseloupe

3D Print files by Jed Norton


Approximate Dimensions 28mm:

  • Length : 128mm
  • Width : 68mm
  • Height : 60mm


Please Note Terms and Conditions of use for STL Files:

The site is a copyrighted work belonging to Antenocitis workshop ltd.

These Terms and Conditions are a legal agreement between you and Antenociti’s workshop ltd for the use of the site, services and stl files.

By accessing or using the site you are accepting these terms of use (on behalf of yourself or the entity that you represent) and you represent and warrant that you have the right, authority, and capacity to enter into these terms of use (on behalf of yourself or the entity that you represent).

If you do not agree with all of the provisions of these terms of use, do not access or use the site.

By accessing or using our Site or downloading our STL files, you agree to the terms below; if you don’t agree, do not use the Site.

1 License. Subject to these Terms of Use, ANTENOCITI’S WORKSHOP LTD grants you a non-transferable, non-exclusive, license to use the Site and STL Files for your personal, non-commercial use

2 Certain Restrictions. The rights granted to you in these Terms of Use are subject to the following restrictions:
(a) you shall not license, sell, rent, lease, transfer, assign, distribute, host, or otherwise commercially exploit the Site, Services or materials you print under this license;
(b) you shall not modify, make derivative works of, disassemble, reverse compile or reverse engineer any part of the Site or STL Files;
(c) you shall not access the Site or Services or STL files in order to build a similar or competitive service; and
(d) except as expressly stated herein, no part of the Site or Services may be copied, reproduced, distributed, republished, downloaded, displayed, posted or transmitted in any form or by any means..

3 Modification. ANTENOCITI’S WORKSHOP LTD reserves the right, at any time, to modify, suspend, or discontinue the Site or Services or any part thereof with or without notice. You agree that ANTENOCITI’S WORKSHOP LTD will not be liable to you or to any third party for any modification, suspension, or discontinuance of the Site or Services or any part thereof, except and if otherwise expressly set forth in Section 8.

Any future release, update, or other addition to functionality of the Site or Services shall be subject to the terms of these Terms of Use. All copyright and other proprietary notices on any Site or Services content must be retained on all copies thereof.

ANTENOCITI’S WORKSHOP LTD reserves the right to change these terms and conditions at any time.

4 No Support or Maintenance. You acknowledge and agree that ANTENOCITI’S WORKSHOP LTD will have no obligation to provide you with any support or maintenance in connection with the Site or Services or STL Files.

5 Ownership. Excluding your User Content (defined below), you acknowledge that all the intellectual property rights, including copyrights, patents, trademarks, and trade secrets, STL Files in the Site are owned by ANTENOCITI’S WORKSHOP LTD or ANTENOCITI’S WORKSHOP LTD’s licensors. The provision of the Site and STL files does not transfer to you or any third party any rights, title or interest in or to such intellectual property rights. ANTENOCITI’S WORKSHOP LTD and its supplier’s reserve all rights not granted in these Terms of Use.

6 Guarantees or warranties. Other than any obligations under the DSR, ANTENOCITI’S WORKSHOP LTD will not be liable in respect of any loss or damage, including special, consequential or indirect loss or damage however arising in relation to your use of the Site or STL files.

2 reviews for USIMF Prowler 4×4 STL 3D Print Files

  1. robort (verified owner)

    Awesome model. Currently experimenting with different FDM printers and methods to see if they’re viable for printing something that does the model justice, but right now it looks like this model needs to be SLA/resin printed to really get a good rendition of the model.

  2. Martin Trudel (verified owner)

    Got mine printed on a SLA/Resin printer and it’s absolutely amazing, was having some doubts about the mudguards but they hold firm, painted already and the experience was flawless. My goal is to add some spice in my upcoming Starfinder game hosting vehicular pursuit and vehicular combat that fit 28mm scale. Those vehicles fit very well in any sci-fi setting and are really fun to paint.

Only logged in customers who have purchased this product may leave a review.