The ‘Ogre’ Explorer for the American Legion. The Orge is meant to be used for 15mm gaming, as it would be huge at 28mm scale.
NOTE: The STL files may be inside a ZIP or RAR archive. You will have to extract the files before use.
Approximate Dimensions at 15mm scale:
- Length: 162mm
- Width: 118mm
- Height: 83mm
Product based on Unity 3D Assets produced by CGPitbull aka Stephane Chasseloupe (see video) – https://assetstore.unity.com/publishers/3815
Adapted for 3D Printing by Jed Norton -Final 3D Print Model may differ from original asset – see 3D Print Parts image for details.
Please Note Terms and Conditions of use for STL Files:
The site is a copyrighted work belonging to Antenocitis workshop ltd.
These Terms and Conditions are a legal agreement between you and Antenociti’s workshop ltd for the use of the site, services and stl files.
By accessing or using our Site or downloading our STL files, you agree to the terms below; if you don’t agree, do not use the Site.
(a) you shall not license, sell, rent, lease, transfer, assign, distribute, host, or otherwise commercially exploit the Site, Services or materials you print under this license;
(b) you shall not modify, make derivative works of, disassemble, reverse compile or reverse engineer any part of the Site or STL Files;
(c) you shall not access the Site or Services or STL files in order to build a similar or competitive service; and
(d) except as expressly stated herein, no part of the Site or Services may be copied, reproduced, distributed, republished, downloaded, displayed, posted or transmitted in any form or by any means..
3 Modification. ANTENOCITI’S WORKSHOP LTD reserves the right, at any time, to modify, suspend, or discontinue the Site or Services or any part thereof with or without notice. You agree that ANTENOCITI’S WORKSHOP LTD will not be liable to you or to any third party for any modification, suspension, or discontinuance of the Site or Services or any part thereof, except and if otherwise expressly set forth in Section 8.
ANTENOCITI’S WORKSHOP LTD reserves the right to change these terms and conditions at any time.
4 No Support or Maintenance. You acknowledge and agree that ANTENOCITI’S WORKSHOP LTD will have no obligation to provide you with any support or maintenance in connection with the Site or Services or STL Files.
6 Guarantees or warranties. Other than any obligations under the DSR, ANTENOCITI’S WORKSHOP LTD will not be liable in respect of any loss or damage, including special, consequential or indirect loss or damage however arising in relation to your use of the Site or STL files.