Instructions for our latest ‘Utility’ building for Survival, the Corner Deli. General notes: 1) The are our ‘Utility’ buildings and as such all MDF parts are unpainted and uncovered. You do not need to remove…
Corner Deli – Building Instructions
Category: Kit Building Instruction
Instruction on building the various kits sold by Antenociti’s Workshop
Safety Corridors – Forward Base – Building Instructions
General notes: 1) This kit is made of Acrylic. There will be a thin plastic-like protective layer on the back of the acrylic parts, to protect the underside of acrylic from scorch marks and dirt…
Short Corridors – Forward Base – Building Instructions
General notes: 1) The MDF Parts for this kit are covered with a protective paper layer on both sides of the MDF, to protect from scorch marks and dirt from the lasering process. You will…
Long Corridors – Forward Base – Building Instructions
General notes: 1) The MDF Parts for this kit are covered with a protective paper layer on both sides of the MDF, to protect from scorch marks and dirt from the lasering process. You will…
Hab Steps – Forward Base – Building Instructions
General notes: 1) The MDF Parts for this kit are covered with a protective paper layer on both sides of the MDF, to protect from scorch marks and dirt from the lasering process. You will…
Hab Ladders – Forward Base – Building Instructions
General notes: 1) The MDF Parts for this kit are covered with a protective paper layer on both sides of the MDF, to protect from scorch marks and dirt from the lasering process. You will…
Hab 4 – Forward Base – Building Instructions
General notes: 1) The MDF Parts for this kit are covered with a protective paper layer on both sides of the MDF, to protect from scorch marks and dirt from the lasering process. You will…
Hab 3 – Forward Base – Building Instructions
General notes: 1) The MDF Parts for this kit are covered with a protective paper layer on both sides of the MDF, to protect from scorch marks and dirt from the lasering process. You will…
Hab 2 – Forward Base – Building Instructions
General notes: 1) The MDF Parts for this kit are covered with a protective paper layer on both sides of the MDF, to protect from scorch marks and dirt from the lasering process. You will…
Hab 1 – Forward Base – Building Instructions
General notes: 1) The MDF Parts for this kit are covered with a protective paper layer on both sides of the MDF, to protect from scorch marks and dirt from the lasering process. You will…