General notes: 1) All MDF parts are pre-painted “pristine” and both sides of the MDF sheet are covered with a protective paper covering. This covering needs to be removed from one or both sides prior…
Nexus Build Instructions
Category: Habitat Instructions
Habitat 5 – Assembling the Ramp
Take the ramp hinge pieces and attach them to either side of the ramp – make sure to get them the correct way up (see image) Next assemble one of the…
Habitat 4 Instructions
Habitat 4: This is a simple build so long as the construction order is followed: Attach bay Windows onto Grey base-plate (For Habitat 4 the base is made up of two parts that…
Habitat 3 Assembly Guide
Habitat 3 Guide: Build the “bay Window” (Look for the “T” at the top of the side pieces to tell you which way up they go (“T” = top) Attach Bay Window to Base…
Hab 10 – Quick Build
Habitat 10 is a very easy build and here is a very brief quick-build set of images: We recommend not gluing in the sides pieces until you have fitted the interior resin parts -…
Habitat 2 Construction.
Habitat 2 is a relatively simple build with one tricky area that needs to be assembled in a specific order. Here I am going to show you how to assemble that tricky area: Firstly assemble…
Habitat 5 – Rough Guide
Habitat 5 is a slightly complex build as it needs to be approached in a specific way – as with all of the Habitats (and MDF kits in general) if a part does not fit,…
Basic Habitat Construction (Habitat 1)
Basic Habitat Assembly: A quick PIctorial assembly guide of the MDF parts of Habitat 1. Notes: i) Always dust/brush the parts before handling and ensure that hands are clean ii) If you intend to remove…